14’’ Gas Concrete Chainsaw

Concrete / Cutting Equipment

14’’ Gas Concrete Chainsaw

Blade chains sold separately. **Must have 20 PSI of water pressure, and 1 GPM flow** Best tested with unit not running, just water hooked up, water should spray 1FT+

    

  • Engine Type    2-Stroke, Air Cooled
  • Displacement    94cc (5.7 cu-in)
  • Horsepower    4.8kW (6.4 hp) @ 9000 rpm
  • Torque    5.7 Nm (50.4 in-lbs) @ 7200 rpm
  • Engine Speed    9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)
  • Chain Speed at Maximum Power    28 m/s (5500 ft /min)
  • Weight    9.5 kg (21 lbs) powerhead only
  • Dimensions    46cm (18") L x 36cm (14") H x 30cm (12") W
  • Starter    Recoil, dust, and water resistant
  • Ignition    Special water resistant electronic ignition
  • Fuel ratio    2% (50:1) gasoline-to-oil
  • Fuel Capacity    1 liter (0.26 gallon)
  • Water Supply Requirement    Minimum: 1.5 bar (20 psi)
  • Water Flow Requirement    Minimum: 4 lpm (1 gpm)
  • Guaranteed Sound Power Level,    115 dB(A); (Kwa=1.0 dB(A))
  • Equivalent Sound Pressure at Ear    104.6 dB(A) (K=1.0 dB(A))
  • Vibration, ahv eq Concrete Cutting     3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle
  • Vibration, ahv eq Pipe Cutting (2)    5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle