Concrete / Cutting Equipment
14’’ Gas Concrete Chainsaw
Blade chains sold separately. **Must have 20 PSI of water pressure, and 1 GPM flow** Best tested with unit not running, just water hooked up, water should spray 1FT+
- Engine Type 2-Stroke, Air Cooled
- Displacement 94cc (5.7 cu-in)
- Horsepower 4.8kW (6.4 hp) @ 9000 rpm
- Torque 5.7 Nm (50.4 in-lbs) @ 7200 rpm
- Engine Speed 9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle)
- Chain Speed at Maximum Power 28 m/s (5500 ft /min)
- Weight 9.5 kg (21 lbs) powerhead only
- Dimensions 46cm (18") L x 36cm (14") H x 30cm (12") W
- Starter Recoil, dust, and water resistant
- Ignition Special water resistant electronic ignition
- Fuel ratio 2% (50:1) gasoline-to-oil
- Fuel Capacity 1 liter (0.26 gallon)
- Water Supply Requirement Minimum: 1.5 bar (20 psi)
- Water Flow Requirement Minimum: 4 lpm (1 gpm)
- Guaranteed Sound Power Level, 115 dB(A); (Kwa=1.0 dB(A))
- Equivalent Sound Pressure at Ear 104.6 dB(A) (K=1.0 dB(A))
- Vibration, ahv eq Concrete Cutting 3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle
- Vibration, ahv eq Pipe Cutting (2) 5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle